LevelOne FCS-5030, User Manual

Page: 92 / 114

transmission_mode
Tx,
Rx,
Both 0/7 Indicate what kind of transmission
mode the machine used. TX:
server, Rx: receiver box, Both:
DVR?.
network_wire <boolean> 0/7 Indicate whether to support the
Ethernet
network_wireless <boolean> 0/7 Indicate whether to support the
wireless
wireless_802dot11b <boolean> 0/7 Indicate whether to support the
wireless 802.11b+
wireless_802dot11g <boolean> 0/7 Indicate whether to support the
wireless 802.11g
wireless_encrypt_wep <boolean> 0/7 Indicate whether to support the
wireless WEP
wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support the
wireless WPA
wireless_encrypt_wpa2 <boolean> 0/7 Indicate whether to support the
wireless WPA2
Group: event_i<0~2>
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
name string[40] 6/6 The identification of this entry
enable 0, 1 6/6 To enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event.
“0” indicates low priority.
“1” indicates normal priority.
“2” indicates high priority.
delay 1~999 6/6 Delay seconds before detect next event.
trigger boot,
di,
motion,
seq,
6/6 Indicate the trigger condition.
“boot” indicates system boot.
“di” indicates digital input.
“motion” indicates video motion detection.
“seq” indicates periodic condition.