LevelOne FCS-4201, User Manual

Page: 26 / 66

Network Camera User’s Manual
26/66
Pan/Tilt/Zoom & connection control buttons :
1.
“Connection”
User can choose Remote or Local
mode for best connection quality.
Proposal: Internet environment, switch Remote
mode.
2.
“Video Stream”
User can choose stream1 or
stream2.
3. “Digital Output” Clicking on the “On” or “Off”
button turns the digital output to either on or off
status.
4. “The direction buttons are” “Left”, “Right”, “Up”,
“Down”, “Cross Angles”, and “Home”. Camera
returns to center when click “Home”
button
5. “Pan Angle”
(PTZ type)
User can choose the angles when the camera moves
left and right each time.
6. “Tilt Angle”
(PTZ type)
User can choose the angles when the camera moves
up and down each time.
7.
“Iris”
Adjust the iris size
8
. “Pan” (PTZ type)
The camera will move from right side to left side
continuously when click the button.
9
. “Patrol” (PTZ type)
The button directs the camera to patrol among the
preset positions in the patrol list, which can be
modified on the
“Camera control page”
. The cycle
of patrol is from 1 to Unlimit.
10.
“Video Tracking” (PTZ type)
is able to track dynamic objects within screen video.
11.
“Focus”
There are two different Focus modes, Focus1 and Focus2, press two
seconds on the Focus icon to switch the mode. Focus1 is autofocus mode, the camera
will do focus after Pan/Tilt moving, Zoom in/out, any large video difference
…and so on.
Focus2 mode, the camera will do focus after Zoom in/out and IR turn on/off.
13.
“
Smart Focus
”
Smart Focus function, use mouse and left key to pull a area, and
then the camera will focus to this area.
14.
“
3D Auto location
”
(PTZ type)
Press the left key of the mouse, and pull and choose a certain area in the picture in
diagonal direction, can enlarge this area, and put this area in the middle position of
picture of controlling.