74
NOTE:
Flip setting is manual-controlled only. If a Preset Position or a
point for other function (ex. Sequence) is set in the position that can only
be reached through FLIP motion, when Flip function is turned off, the
position cannot be reached anymore.
NOTE:
To make the Dome Camera tilt between a specific range, such
as -10° to +100° or -10
°
~ +190
°
, please go to the
Tilt Range setting
page
to set the tilt angle range. Otherwise, the Dome Camera will tilt
90°as the default setting.
M.E. Mode
M.E. is a standard mechanical operation. As the Dome Camera tilts to
the maximum angle, it will pan 180°, and then continue tilting to keep
tracking objects.
Speed by Zoom
Enable this function to adjust the pan/tilt speed automatically by internal
algorithm when zooming. The larger zoom ratio leads to the lower rotating
speed. Click on <Set> button to save the setting.
ICR Function
With the IR cut filter, the camera can still catch clear image at night time or in
low light conditions
Auto
In the Auto mode, the internal circuit will automatically decide the
occasion to remove the IR cut filter according to the image brightness
level.
On
Select the item to remove the IR cut filter.
Off
Select the item to disable IR function
Summary of Contents for FCS-4041
