LevelOne FCS-4041, User Manual

Page: 40 / 81

40
7.2.8 Application (Alarm Settings)
The Application setting can be found under this path: System> Application .
The Camera equips four alarm inputs and two relay outputs for cooperating with
alarm system to catch event
s’ images. Please refer to
User
’s Manual
for Alarm
Pin Definition to connect the alarm devices.
Alarm Pin Selection
Select an alarm pin which is to be configured from the <Alarm Pin Selection>
field. Then click on the button <Edit> below the field to carry on alarm
programming.
Alarm Setting

Alarm Switch
The Administrator can enable or disable the alarm function.

Alarm Type
Select an alarm type, <Normal close> or <Normal open>, that
corresponds with the alarm application.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take at an alarm
occurrence. All options are listed as follows:

Enable Alarm Output 1/2
Select these items to enable alarm relay outputs.

Send Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by FTP
and/or E-Mail when an alarm is triggered.

Upload Image by FTP
Select this item and the Administrator can assign a FTP site and
configure various parameters. When the alarm is triggered, event
images will be uploaded to the appointed FTP site.