24
Sync with NTP Server
Network Time Protocol (NTP) is an alternate way to synchronize your camera
’s
clock with a NTP server. Please specify the server you wish to synchronize in
the enter field. Then select an update interval from the drop-down menu. For
further information about NTP, please see the web site:
7.2.2
Security
The Security setting can be found under this path:
System> Security
.
Click the Security category, there will be a drop-down menu with tabs including
<User>, <HTTPS>, <IP Filter>, and <IEEE 802.1X>.
7.2.2.1 User
The User setting can be found under this path:
System> Security> User
.
Admin Password
Change the administrator
’s password by inputting the new password in both text
boxes. The input characters/numbers will be displayed as dots for security
purposes. After clicking on <Save>, the web browser will ask the Administrator
for the new password for access. The maximum length of the password is 14
digits.
NOTE:
The following characters are valid: A-Z, a-z, 0-
9, !#$%&’-.@^_~.
Add user
Type the new user's name and password and click on <Add> to add the new
user. Both user name and password can be up to 16 characters. The new user
will be displayed in the user name list. There is a maximum of twenty user
accounts. Each user can be assigned the privileges of
<Camera control>
,
<Talk>
and
<Listen>
.
Summary of Contents for FCS-4041
