LevelOne FBR-1161, User Manual

Page: 55 / 60

52
WAN
Virtual Circuit : There are eight groups of PVC can be defined.
Status :
“Not connected” or “Connected”
Connection Type : Name of the WAN connection.
IP Address : WAN port IP address.
Subnet mask : WAN port IP subnet mask.
Default Gateway : The IP address of the default gateway.
DNS Server : WAN port DHCP role - Enabled, Relay or disabled
ADSL
ADSL firmware Ver : This is the DSL firmware version associated with your router
Line State : This is the status of your ADSL link.
Modulation : Display the modulation type.
Annex Mode : To show the router
’s type, e.g. Annex A, Annex B
SNR Margin (Downstream) / (Upstream)
Shows noise ratio, a measurement performed in the frequency domain.
Attenuation (Downstream) / (Upstream)
Attenuation is a measure of the loss of signal strength or light power that occurs as light
pulses propagate through a run of multimode or single-mode fiber. Measurements are
typically defined in terms of decibels or dB/km. The further you are away from the
exchange the higher your attenuation figure will be as the signal loss increases.
Data Rate (Downstream) / (Upstream) : Transfer data speed rate