28
Static IP Address
Encapsulation:
1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP
LLC(IPoA), 1483 Routed IP VC-Mux, check your ISP for proper connection type.
Static IP Address
: Enter the IP address of ADSL Router in dotted decimal notation, it
’s
assigned by your ISP.
IP Subnet Mask
: The default is 255.0.0.0. User can change it to other such as
255.255.255.0.Type the subnet mask assigned to you by your ISP (if given).
Gateway
: You must specify a gateway IP address (supplied by your ISP) when you use
1483 Bridged IP in the Encapsulation field in the previous screen.
NAT (
Network Address Translation
)
: Select Enable or Disable from the drop-sown list
box. Refer to the NAT chapter for more details.
Default Route:
Select Yes or NO to set route rule. It recommend by default setting.
TCP MTU Option:
Maximum Transmission Unit. The size of the largest datagram that
the IP attempts to send through the interface.
Dynamic Route
:
RIP Version
: Select the RIP version from RIP-1, RIP-2B and RIP-2M.
RIP Direction
: Select the RIP direction from None, Both, In Only and Out Only.
Multicast
: IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group - it is not used to carry user data. The ADSL
Modem Series supports both IGMP version 1 (IGMP-v1) and IGMP-v2. Select Disabled
to disable it
Summary of Contents for FBR-1161
Page 1: ...FBR 1161 ADSL2 Modem Router 1WAN 1LAN 1USB User Manual V1 0...
Page 16: ...13 Please plug USB cable into ADSL USB Modem Then click Finish...
Page 26: ...23 Quick Start Wizard Step1 Set your new password Step2 Choose your time zone...
Page 27: ...24 Step3 Set your Internet connection Step4 Restart your ADSL Router...
