AIP-W512
- 44 -
To assign a computer or server to be a DMZ server:
1. Check the
Enable
DMZ
checkbox.
2. Enter the IP Address of a local host in the
DMZ Host IP Address
field.
3. Click the
Apply Changes
button.
Note:
After you set the DMZ host, the firewall related to the host will not work.
4.7.7 VLAN
Choose menu
“
Firewall
→
VLAN
”, if you want to configure the Guest and Internal networks on
VLAN, the switch you are using must support VLAN. As a prerequisite step, configure a port on the
switch for handling VLAN tagged packets as described in the IEEE802.1Q standard, and enable
this field as shown in Figure 4-33.
Figure 4-33 VLAN
Be sure to click the
Apply Changes
button to save your settings on this page.
