AIP-W512
- 37 -
4.6.5 WDS Settings
Choose menu
“
Wireless
→
WDS Settings
”, you can configure the advanced settings of your
wireless network.
Figure 4-24 Wireless Advanced
To add wireless AP by MAC Address, click
Enable WDS
.
MAC Address
-
The wireless station's MAC address that you want to add.
Data Rate -
Select transmission data rate from the drop down menu. Data rate can be
auto-selected, 1Mbps to 54Mbps or MCS.
Set Security
- There are two wireless security modes supported by the WDS: WEP (Wired
Equivalent Privacy), and WPA2 (Wi-Fi Protected Access 2).
Encryption
– Use drop down menu to configure WDS security, you can select it from
None
,
WEP 64-bits
,
WEP 128-bits
, or
WPA2 (AES)
.
WEP Key Format
–
Hexadecimal
and
ASCII
formats are provided here
.
Hexadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length.
ASCII
format stands for any combination of keyboard characters in the specified
length.
64-bit -
You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not promoted) or 5 ASCII characters.
128-bit -
You can enter 26 hexadecimal
digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 13 ASCII
characters.
