AIP-W512
- 24 -
Connect on Demand
–
In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (
Max Idle Time
) and
be
re-established
when you attempt to access the Internet again.
Manual -
You can click the
Connect
/
Disconnect
button to connect/disconnect
immediately.
This mode also supports the
Max Idle Time
function as
Connect on
Demand
mode. The Internet connection can be disconnected automatically after a
specified inactivity period and
re-established when you attempt to access the Internet
again.
Note:
Sometimes the connection cannot be terminated although you specify a time to Max
Idle Time because some applications are visiting the Internet continually in the
background.
Idle Time -
If you want your Internet connection to be active constantly, please
enter “0” in the
Max Idle Time
field.
Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
MTU Size -
The default MTU size is
“1452” bytes. It is not recommended that you change the
default
MTU Size
unless required by your ISP.
Attain DNS Automatically
– Receives DNS address automatically from the ISP.
Set DNS Manually -
If your ISP gives you one or two DNS address, select
Set DNS
Manually
and enter the primary and secondary addresses into the correct fields. Otherwise,
the DNS servers will be assigned dynamically from your ISP.
Note:
If you find an error on the website after entering the DNS addresses, it is likely that
your DNS server has been set up improperly. You should contact your ISP to get DNS
server addresses.
Click the
Apply Changes
button to save your settings.
