Chapter 3 Operations
Chapter 3 Operations
3.1 Finger placement
3.2 Light and Sound Prompt
3.2.1 Instruction
Sound prompt: the sound given out by the buzzer in the lock.
Light prompt: the light seen on the front panel of fingerprint lock.
3.2.2 Light and Sound Prompt Illustration
Operation
Sound
Prompt
Light
Prompt
Digital
display
Remark
Fingerprint
enrollment
Code
setting
Unlock with
fingerprint
Unlock with
code
Invalid
fingerprint
Invalid code
Cannot detect
fingerprint
Passage
mode
Low power
state
Fingerprint
sensor is
damaged
Self-locked
state
“Di.Di
” one short and one long
sounds
…
“Di.Di
” one short and one long
sounds
…
Blue light on
00-99
00-99 indicates the fingerprint position
Blue light on
n0
n0-n2 indicates that the code belongs
to group 0-2
“Di ”
short sound
. one
“Di ”
short sound
. one
Blue light on
00-99
00 indicates the fingerprint position
Blue light on
n0
n0 indicates that the code belongs to
group 0
“Di” one short sound
Red light on
Red light on
--
When use invalid fingerprint to open
“Di, Di” two short sounds
“Di.Di.” two short sounds
Red light on
When use invalid code to open
“Di…” one long sound
Blue light on
Blue light flashes every 4 seconds
“Do, Re, Mi” three music sounds
Red light on
When use fingerprint and code to open
“Wu, Wu, Wu” three sounds alarm
Red light on
The state will be cancelled
automatically after 5 minutes
“Di” short sound
Red light fl-
ashes 3 times
--
--
--
--
--
--
--
--
To capture a clear fingerprint image,
place the finger flat and tight on the
sensor surface and give a proper
pressure (User should not press the
sensor hard. The notification will not
repeat again hereinafter).
it is correct to place finger as
Picture a (side) and Picture b
(face), while none of Picture c, d,
e, f is correct.
Note:
A
B
C
D
E
F
Fingerprint
memory is full
“Di.Di.Di.Di.” four short sounds
Red light on
Fingerprint memory is full
FU
17
16