9
Dial Command
SMS Command
Default
0000xxxx#
PIN xxxx
1234
Change of PIN SIM
Where xxxx are four digits of new PINs.
Example:
Original PIN of GSM gate is 1234. PIN of SIM card, which will be used in GSM
gate is 4321.
●
Pick up handset and wait for dialing tone.
●
Enter programming mode by dialing #1234#.
●
After hearing the programming tone dial 00004321#.
●
Hang up.
It is not possible to program gate by SMS messages if PIN SIM in gate is not
conformable to PIN of SIM card. Login of gate in GSM network is then not carried
out. This is e.g. state after initialization. For conformity of PINs choose another
way of programming.
5.2. Set-up of Direction Adding
Some exchanges do not repeat pre-selection of number dialed before
interconnection when connecting call to transmitter with GSM gate. This function
allows reconstruction of originally dialed number by adding of removed pre-
selection.
Dial Command
SMS Command
Default
0100x#
PDIR x
Not activated from production.
Where x is 0 to 7 digits, which shall be added.
Removal of values by phone is carried out by instruction 0100# or by SMS
message PDIR . (Point represents data) or PDIR ““.
5.3. Set-up of Allowed Directions
If you want to avoid connection of useless calls (which would have higher tariffs
than when connected through fixed line) through GSM gate set required values of
pre-selections as allowed directions. Other calls, e.g. calls into fixed local or toll
phone network, will not be connected through GSM gate.
Dial Command
SMS Command
Default
0201x#
ADIR1 x
1
0202x#
ADIR2 x
2
0203x#
ADIR3 x
3
0204x#
ADIR4 x
4
0205x#
ADIR5 x
5
0206x#
ADIR6 x
6
