Level GB 060 515 C, User Manual

Page: 18 / 24

18
SMS Inquiry
Reply
Value x
Value y1
Value y2
Value z
Value q
Value r pin_GGA
$GPGGA,x,y1,y2,z,q,r
Time hhmmss.sss h-hours, m-minutes, s-seconds
Coordinates of latitude ddmm.mmmm (e.g. 5025.223400,N)
Coordinates of longitude ddmm.mmmm (e.g. 01610.090300,E)
Validity of GPS data, 0 = invalid data, 1 = valid data
Number of satellites
Further GPS data …
Note: GPS can be considered fully functional when it receives valid data and at
least 4 satellites.
Checking the car alarm and sensors functionality
Make a check of each installed alarm sensors by making an alarm.
PLEASE NOTE that an alarm will block all sensors for three minutes.
Create audio communication with callback and make volume settings for
loudspeaker and sensitivity settings for microphone. See table of SMS commands.
Erase the testing phone number TEL 1 and take out the testing SIM card.
4. Technical parameters,
Maintenance
4.1. Technical parameters
GSM 900 / 1800 MHz
SIM card plug-in 3 V
GSM antenna connector FME – m
Communication Call, SMS, GSM Data, GPRS
Call Alarm call – ringing only (free of charge)
Two-way call or listening-in
SMS SMS alarms, information, commands, inquiries, replies,
settings (up to 4 parameters in one SMS)
GSM Data Configuration update
GPRS Class 10
Support of VPN and dynamic IP
UDP protocol
Encrypted data transmission with 128 bit symmetric code
GPS 12 channels
Navman
Cold start 2 min
Antenna connector SMB – f