Connecting Power to the Camera
1. Take the second power adapter and connect the small
end of the power adapter marked CAMERA into the
DC input
on the side of the camera. For safety reasons,
ONLY use the adapters included in the package.
2. On the side of the camera, slide the POWER switch
LEFT to the ON position. The
POWeR leD
will light up.
note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation
hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.
11
mylevana.com
SeTuP
On / OFF
Switch
