Leuze
electronic
Quickstart guide IT 4715
Leuze
electronic
Page
9
With powering over the power supply at the RS 232-cable / ext IT 4xxx
Art-No. 501 03413
You have to connect the IT 4715 as shown.
Necessary parts:
1x
IT 4715- XX-1-232
1x
501 04 442
TTL-cable RS 232 / ext
1x
501 03 403
power supply
Pinning 9 pin-D-sub connector (female) at the cable 42203758-04
PIN-number
Signal
Description
1
Shield
Shield
2
TX
Transmit data (-5 to +5V)
3
RX
Receive data (-5 to +5V)
5
GND
Signal ground
7
CTS
Clear to send
8
RTS
Request to send
PIN at power connector
Signal
Description
1
VCC IN
4,5 - 12 Volt DC
2
GND
Ground
The suitable power supply for the IT 4xxx (100-240 V / 47-63 Hz) is the Article-Number 501 03403.
RS 232 data transmission with 115200 Baud, 8 databit, 1 stopbit, no parity, postfixes CR/LF.
Configuration for Leuze standard protocol
Leuze standard protocol:
RS 232 with 9600 Baud, 8 databit, 1 stopbit, no parity, prefix STX and postfixes CR/LF
Leuze standard protocol
