IT 4820 - 03
0705
Leuze
electronic
Connecting the IT 4820 to the PS/2 interface
The operation of the IT 4820 in keyboard emulation mode is described in this section. A PC keyboard is emulated in this operating
mode. The data which are read in are written directly to the currently activated program. Thus, the data can be processed further
in all standard programs.
required parts:
1x
IT 4820 XX 0C1C
1x
501 03 990
Base station ST 2020
1x
501 03 989
Power supply unit ST 2020
1x
501 03 409
PS/2 cable
Procedure:
1.
Switch off the PC.
2.
Disconnect the keyboard.
3.
Connect the cable for the ST 2020 base station
between the keyboard and the PC.
4.
Switch the PC back on.
5.
Scan the 2D code shown below.
6.
Return the IT 4820 to the base station to apply
the settings. This procedure is concluded with
audible confirmation signals.
Notice!
To charge the IT 4820, the power sup-
ply unit must be plugged in and the
hand-held scanner placed in the
ST 2020 base station.
Disconnect
IT 4820
