Leuze electronic GmbH + Co. KG
Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730
IT 4820 - 03
www.leuze.de
Leuze
electronic
Connecting the IT 4820 to the MA 21
required parts:
1x
IT 4820 XX 0C1C
1x
501 03 990
Base station ST 2020
1x
501 04 586
Cable TTL-RS232/PIN9
1x
501 03 989
Power supply unit ST 2020
1x
500 35 421
KB 021 Z
1x
500 30 481
MA 21 100
Pin assignments KB021 Z:
Core colour:
signal
terminal in the MA 21:
brown
(RXD)
26
white
(TXD)
27
blue
(GND)
28
red
(VCC)
black
(GND)
bare (shield)
(PE)
21
Procedure:
1.
Connect cable KB 021 Z to the MA 21… acc. to the above pin assignments.
2.
Connect the interface cable to cable KB 021 Z. Connect the interface cable and the power
supply unit to the base station (see "Connecting the IT 4820 to the serial PC interface").
3.
Scan the adjacent 2D code.
The IT 4820 is set to the following transmission parameters: RS 232 transmission with 9,600
baud, 7 data bits, 1 stop bit, even parity, terminators <CR><LF>.
4.
Return the IT 4820 to the base station to apply the settings. This procedure is concluded with
audible confirmation signals.
IT 4820
2D-code hand-held scanner with Bluetooth data transmission
