5.4 IT 1910i to PS2 interface
The operation of the IT 1910i in keyboard-wedge mode is described in this chapter. A PC keyboard is
emulated in this operating mode. The data which are read in are written directly to the currently activated
program. Thus, the data can be processed further in all standard programs.
Required parts:
1x
50122436
IT 1910i ER-3
1x 50114519
KB PS2-1 IT190x
Please connect the IT 1910i acc. to the adjacent figures.
To do this, proceed as follows:
1. Switch off the PC.
2. Unplug the keyboard.
3. Plug in the IT 1910i hand-held scanner
between the keyboard and the PC.
4. Switch the PC back on.
5. Scan the code shown below.
5.4.1.1
Configuration
PS2 keyboard emulation with CR LF
Disconnect
Leuze electronic
IT1910i
17
