Leuze electronic BCL558i Technical Description Download Page 95

Page: 95 / 192

BCL 558

Leuze electronic

8.3.2

Parameter menu

Parameter handling

The

Parameter handling

submenu is used to lock and release the parameter input via the

display and for resetting to default values.

Level 3

Level 4

Level 5

Selection/configuration option

Description

Standard

Parameter
enabling

OFF/ON

The standard setting (

OFF

) prevents unintended parameter

changes.
If parameter enabling is activated (

), parameters can be changed

manually.

OFF

Parameters to
default

By pressing the enter button

after selecting

Parameters to default

, all parameters are reset to their

standard settings without any further security prompts.
In this case, English is selected as the display language.

Table 8.1:

Parameter handling submenu

Summary of Contents for BCL558i

































































































































































































Search results

Summary of Contents for BCL558i

Reviews:

Leuze electronic BCL558i, Technical Description, Page: 95 / 192

Search results

Summary of Contents for BCL558i

Reviews: