Leuze electronic BCL 90 Technical Description Download Page 67

Page: 67 / 119

Leuze

electronic

Accessories (Order Codes)

Leuze electronic

Technical Description BCL 90

T 35/

24V

b) BCL with heater

Temperature range of the connection materials:

Stationary: –50 … +70 °C; moving: -40 … +70 °C

Table 5.3: Available accessories: cables and plug covers for the BCL with heater

Leuze multiNet plus master

Table 5.4: Available accessory component: network controller

5.2

Mounting Accessories

Table 5.5: Available accessories: mounting accessories

Type /
order number

Description

Cores

Length Connecting

KB 090-3000H /
500 35 324

2 x plug covers, protection class IP 65,
with two connecting cables,

6.7 mm each, shielded.

Required quantity: 1 per BCL

each 13 x
0.14 mm² +
2 x 0.75 mm²

3 m

BCL 90 to
MA 90

KB 090-3000HO/
500 35 325

Plug cover, protection class IP 65, with
two connection cables,

6.7 mm

each, shielded, two open ends
(stripped).
Required quantity: 1 per BCL

1 x 18 x 0.14 mm²
1 x 2 x 0.75 mm²

3 m

BCL 90 to
host, sensors,
PLC and
external power
supply unit

Notice!
Other cable lengths/cables for BCL with heater upon request.

Order number

Type

Description

on request

MA 30 / MA 31

Network controller

Type /
order number

Description

Fig.

BT 90 S /
500 35 514

Quick-action clamping device, with complete fastening materials

Figure 5.4

BT 90 W /
500 35 515

Bracket support, single, with two screws M 6 x 10 mm, self-locking

Figure 5.2

BT 90 G /
500 35 516

Joint bracket (double bracket support 2 013 824),
with 2 screws M 6 x 10 mm, self-locking

Figure 5.3

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for BCL 90
























































































































Search results

Summary of Contents for BCL 90

Reviews:

Leuze electronic BCL 90, Technical Description, Page: 67 / 119

Search results

Summary of Contents for BCL 90

Reviews: