Installation and mounting
66
BCL 338
i
Leuze electronic
6.2.3
BT 59 mounting device
The BT 59 mounting device offers you an additional fastening option. For order guide,
please refer to chapter "Type overview and accessories" on page 175.
BT 59 mounting device
Figure 6.5:
BT 59 mounting device
Note!
When mounting, ensure that the scanning beam is not reflected directly back to the scanner
by the label which is being read. For further information, see the notices in Chapter 6.3!
Please refer to Chapter 5.4 for the permissible minimum and maximum distances between
the BCL 338
i
and the labels to be read.
Clamping jaws for mounting
on the BCL 338
i
A
Holder, turnable 360°
B
ITEM joint, angle adjustable ±90°
C
M8x16 screw cylinder, M8 serrated washer, M8
sliding block, connectors for ITEM profile (2x)
all dimensions in mm