manualshive.com logo in svg

Leuze electronic AMS 384, Technical Description

Share
Download
Leuze electronic AMS 384 Technical Description Download Page 43

Display and control panel AMS 384i

Leuze electronic

AMS 384

i

40

TNT

 35/7-2

4

V

8.3

Menu description

8.3.1

The main menus

After voltage has been applied to the laser, device information is displayed for several 
seconds. The display then shows the measurement window with all status information.

 

AMS 384i 120
Leuze electronic

GmbH & Co. KG

SW: V 1.3.0

HW:1

SN: ---------------

Device information - main menu

This menu item contains detailed information on
• device model,
• manufacturer,
• software and hardware version,
• serial number.
No entries can be made via the display.

Network information           
Ident Code:

"0x32"

Baud rate:

500 kbit/s

Network information - main menu

• Explanations of Ident code and baud rate.

No entries can be made via the display.

IO1

LSR

PLB

IBS

IO2 TMP

ATT

ERR

+ 87.000 m

Status and measurement data - main menu

• Display of status-, warning-, and error messages.
• Status overview of the switching inputs/outputs.
• Bar graph for the reception level.
• Measurement value.
No entries can be made via the display.
See "Indicators in the display" on page 36.

Parameter                    

Parameter handling
Interbus
Position value
I/O
Other

Parameter - main menu

• Configuration of the AMS.
See "Parameter menu" on page 41.

Language selection           
o Deutsch
o English
o Español
o Français
o Italiano

Language selection - main menu

• Selection of the display language.
See "Language selection menu" on page 44.

Service                      

Status messages
Diagnostics
Expanded diagnostics

Service - main menu

• Display of status messages.
• Display of diagnostic data.
No entries can be made via the display.
See "Service menu" on page 45.

Summary of Contents for AMS 384




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands