Important parameters
50
BCL 8
Leuze electronic
Activation
Switching input 1
function
See menu "switching input"
Auto-start after
decoding
In this mode, the scanner reads via an internal trigger signal with max
-
imum performance. Attention: Up to 100 codes per second may be
transmitted.
Command character The standard online character for the trigger start is the ´+´ character.
This character can be changed only via the tree structure.
Decode delay time This point is usually used only for test purposes. After the time set
here has passed, the scanner automatically reactivates itself following
a reading gate end (e.g. in combination with "Autostart after decod
-
ing").
UM_BCL8_de_50040581.book Seite 50 Montag, 24. Februar 2020 9:53 09
