40
Power Supplies:
ID
The ePowerSwitch 8M+
R2
automatically creates an ID Code to clearly identify each power input.
•
PW followed by “A” or “B” identifies power supply input A and B of each Digital Input Module
Create new rule:
Click on this button to create a new rule.
Name
In this field, enter the name you want to give to the two power supplies “PWA” and “PWB”. The name can
be from 1 to 32 characters long, and can contain alphanumeric characters.
Do not use quotes or special characters in labels!
Digital Inputs
ID
The ePowerSwitch 8M+
R2
automatically creates an ID Code to clearly identify each d input.
•
DI
followed by a number between 1 and 16 identifies each digital input of the module
Create new rule:
Click on this button to create a new rule.
Name:
In this fields, enter the name you want to give to each Digital Input. The name can be from 1 to 32
characters long, and can contain alphanumeric characters.
Do not use quotes or special characters in labels!
LOGOUT:
Click "Logout" at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES:
Click "Discard Changes" at the bottom of the page to discard all the changes you have made on this page.
APPLY CHANGES:
Click "Apply Changes" at the bottom of the page to save changes.
