Page 4 of 15
5/16”
5/16”
1/2”
1/2”
STEP 1:
STEP 3:
STEP 5:
STEP 4:
STEP 6:
STEP 2:
ASSEMBLY
Feed wire [
B
] through
two 54in A-frame tubes
[
F
].
IMPORTANT:
Yellow wire, driver’s
side. Green wire,
passenger’s side (curb
side). [Fg. 1]
TOOLS: TWO 3/4” WRENCHES
TOOLS: TWO 3/4” WRENCHES
TOOLS: TWO 3/4” WRENCHES
TOOLS: TORQUE WRENCH WITH
13/16” DEEP WELL SOCKET
Attach a-frame tubes
[F]
. [Fg. 5]
Attach wheels
[E]
using 5 lug nuts per wheel. [Fg. 8]
IMPORTANT:
Tighten each
lug nut to
50-75 ft. lbs.
torque.
At the front of each frame
tube
[H]
, install hardware
as shown. Attach frame
angle
[G]
. [Fg. 3-4]
Attach coupler [
C
] and
safety cables [
D
]. [Fg.
6-7]
Attach frame tubes [
H
] to axle [
A
]. [Fg. 2]
PREPARATION:
Place axle [
A
] on two jack stands (Optional & Recommended, user supplied, not included).
Unless otherwise noted, for the following steps “assembly fit” all nuts and bolts, meaning snug but
with a bit of play for alignment of parts from one step to the next.
[Fg. 1]
[Fg. 5]
[Fg. 8]
[Fg. 3]
[Fg. 6]
[Fg. 7]
[Fg. 4]
[Fg. 2]
TOOLS: ONE 1/2” WRENCH
& ONE 3/4” ALLEN WRENCH
F
F
H
H
A
H
G
B
A
E
H
H
G
F
D
