LST-MAT1/MAT2
EN
Provide practical and high-quality equipment and application solutions for the
splicing and production of advertising printing, fast soft doors, awnings, tents,
inflatable castles, plastic products, etc.
Application
- Splicing and production of advertising printing - tents
- car tents - membrane structures - open-air storage
- automobile transportation - inflatable castles - plastic
LESITE
Please read this manual carefully before using this machine,
and keep it for future reference.
Precautions
Please confirm that the machine is turned off and unplugged
before disassembling the welding machine, so as not to be
injured by live wires or components inside the machine.
The welding machine generates high temperature and high
heat, which may cause fire or explosion when used incorrectly,
especially when it is close to combustible materials or explosive gas.
Please do not touch the hot wedge (during welding work or when the
welding machine has not completely cooled down) so as not to burn.
The power supply voltage must match the rated voltage
marked on the welding machine and be reliably grounded. Connect the
welding machine to a socket with a protective ground conductor.
In order to ensure the safety of the operators and the reliable
operation of the equipment, the power supply at the construction site
must be equipped with a regulated power supply and a leakage
protector.
The welding machine must be operated under the correct control of the
operator, otherwise it may cause combustion or explosion due to
high temperature.
It is strictly forbidden to use the welding machine in water or muddy
ground, avoid soaking, rain or damp.
