- 7 -
Cleaning and care
Risk of personal injury!
ALWAYS remove the plug
7
before cleaning the
appliance.
There is a risk of electric shock! Allow the appliance
to cool down. Risk of Burns!
CAUTION!
Never use aggressive cleansers. These can damage
the surfaces.
• Clean the housing with a soft, dry cloth only.
• Clean the metal components with a lightly water-
moistened cloth and a mild, non-aggressive cleaning
agent.
Scale removal
Should the steam output diminish over a period of
time, decalcify the steam brush.
• For decalcification use a standard commercial
descaling agent based on citric acid. Proceed
as detailed in the product instructions.
Storage
Attention!
Remove the plug
7
from the power socket and allow
the appliance to cool down before putting it into
storage.
Risk of fire!
Store the appliance at a dry location. You can also
hang the appliance up by the suspension eye
6
.
Troubleshooting
The steam brush ejects no or very little steam:
The supply of water in the steam brush is exhausted.
Fill the water tank
1
with water (See "Filling with
water").
The steam brush does not heat itself up:
The appliance is not connected to mains power.
Insert the plug
7
into a wall power socket and
set the desired temperature with the temperature
regulator
3
.
The steam brush is defective. Arrange for the ap-
pliance to be repaired by a qualified specialist.
The power socket is defective. Try another wall socket.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.
IB_KH1270_E40979_LB4 17.10.2008 11:05 Uhr Seite 7
