LEROY-SOMER
4946 - 2013.07 / a
POWERDRIVE MD2CS
33
A
E
D
F
C
B
G
en
InstallatIon and maIntenance
Chassis-mounted variable speed drive
PaRameteR-settInG InteRFace and oPtIons
• Architecture
From the welcome screen, press the
button to access the
main page of the parameter-setting interface, consisting of 5
touch-sensitive buttons:
- Information
: can be used to obtain information very quickly
about the drive, the fieldbus option, the parameter-setting
interface, and can also be used to select the language.
- Read mode
: Is used to display the status of the drive when
stopped or in operation, as well as its main measurement
data points.
- Parameter setting
: Used for reading and/or modification of
all the drive parameters, as well as to set the date and time on
the display.
- Control via keypad
: Gives direct access to motor control
via the touch screen (Run/stop, direction of rotation, speed
reference). these screen parameters can be set using the
Parameter setting/Parameter setting via the keypad menu.
Control via the keypad is disabled in factory-set configuration.
- Trip history
: Gives a quick overview of the last 10 drive
trips.
-
: this button is accessible on all screens in factory-set
configuration and is used to give a stop command (can be
disabled).
at any time and regardless of the screen displayed, the
button can be used to return to previous pages, as far as the
interface main page.
For further information, see the commissioning manual
ref. 4617.
5.1.2 - MDX-KEYPAD
5.2.3.1 - General
this keypad, which is remote from the drive, makes easy the
setting of the
POWERDRIVE MD2CS
and provides access
to all parameters. Its lcd display, consisting of one line of
12 characters and 2 lines of 16 characters, offers text which
can be displayed in 4 languages (english, French, German
and spanish).
the mdX-KeYPad has 2 main functions:
- a read mode for
POWERDRIVE MD2CS
supervision and
diagnostics
- an access mode to all the
POWERDRIVE MD2CS
parameters in order to optimise settings or configure special
applications.
as soon as it is switched on, the mdX-KeYPad is set to read
mode. the
buttons are used to scroll through the all
parameters required for supervision and diagnostics:
- motor current
- motor frequency
- motor voltage
- analog I/o levels
- digital I/o states
- logic function states
- timer
Ref.
Function
a
3-line backlit lcd display indicating:
- the drive operating status and its main data
- the main adjustment parameters via a "
Quick
parameter setting
" menu
- all the drive parameters via 21 "
Advanced parameter
setting
" menus (access via a code)
B
Green button for run command if control via the keypad is
enabled.
see "
Keypad set up
".
c
Red button for drive reset or to give a stop command if
control via the keypad is enabled.
see parameters
Ctr.05 (6.43)
and
06.12
.
d
Blue button for change of direction of rotation if control via
the keypad is enabled.
see parameter
Ctr.05 (6.43)
.
e
navigation button (
,
,
,
) for moving
through the various menus and changing the contents of
parameters.
F
button for saving and changing the mode (display,
read, set parameters).
G
"
?
"
button not used.
For more information, see the commissioning manual
ref. 4617. This manual describes configuration using the
mdX-Powerscreen parameter-setting interface, but the
commissioning procedure also applies to the mdX-KeYPad.
• Installation
the mdX-KeYPad does not require any special installation.
at the power off, simply connect it via its 1.5 metre cable
(supplied with the keypad), on P2 connector.
5.1.3 - MDX-SOFT
the mdX-soFt enables parameter setting or supervision of
the
POWERDRIVE MD2CS
from a Pc. numerous functions
are available:
- Fast commissioning
- File saving
- Comparison of 2 files or one file with the factory settings
- Printing of a complete file or differences compared to the
factory settings
- supervision
- diagnostics
To connect the PC to the POWERDRIVE MD2CS, use an
"MDX-USB Isolator" isolated USB cable.
this software can be downloaded from the web at the
following address: http://www.leroy-somer.com/