Leroy-Somer LSA R 49.1 Installation And Maintenance Manual Download Page 17

17

INSTALLATION AND MAINTENANCE

LSA R 49.1 Air/air heat exchanger

ALTERNATORS - Ex II 3 G

 

SPARE PARTS

4081 en - 09.2006 / a

LEROY-SOMER

5 - SPARE PARTS

5.1 - First maintenance parts

Emergency repair kits are available as an option.
They contain the following items :

5.2 - Technical support service

Our technical support service will be pleased to provide any
additional information you may require.

When ordering spare parts, you should indicate the
complete machine type, its serial number and the
information given on the nameplate.

Address your enquiry to your usual contact, or to :

                    

 MOTEURS LEROY-SOMER

                      Usine de Sillac/Alternateurs
           16015 ANGOULEME CEDEX - FRANCE
Tel. : (33) 05.45.64.45.64
Technical Support Service : (33) 05.45.64.43.69
                                             (33) 05.45.64.43.67
Fax : (33) 05.45.64.43.24

Part numbers should be identified from the exploded views
and their description from the parts list.
Our extensive network of service centres can dispatch the
necessary parts without delay. 
To ensure correct operation and the safety of our machines,
we recommend the use of original manufacturer spare parts.
In the event of failure to comply with this advice, the
manufacturer cannot be held responsible for any damage.

Ref.

Description

Reference

Code

198

Voltage regulator 
(AVR)r

R 448

AEM 110 RE 005

343

Forward diodes
Backward diodes

LSA 491.9.056
LSA 491.9.057

SEN 491 AW 056 
SEN 491 AW 057

347

Surge suppressor : 
250V

LSA 491.9.058

SEN 491 AW 058

AVR slow-blow fuse

250V - 10A

PEL 010 FA 004

Other spare parts

60

DE bearing

6322 - C3

RLT 110 OU 030

70

NDE bearing

6320 - C3

RLT 100 OU 030

Summary of Contents for LSA R 49.1





















Reviews: