The Nutrimill flour canister contains a rubber
gasket to seal the canister and prevent flour
leakage. This gasket can become “tacky” causing
the lid to be difficult to install and remove.
To solve this problem rub one of the following on
the gasket:
• Vegalene (or other non-stick spray)
• Flour
• Cornstarch
Note: you will need to periodically
reapply your choice of lubricant,
especially after washing.
The separator cup collects the finest flour
particles (pastry flour). The separator cup must
be in place or your mill will blow flour. (Flour in
separator cup can be used.)
Be sure to shake the
flour out of your filter
each time you empty the
flour canister to prevent
it from clogging.
Filter does not need to
be washed after each
use.
Note:
be sure there is no flour in the filter before
washing.
Flour Canister
Maintenance
The inlet grommet and the filter should be
replaced every 2 years or as needed.
Milling Tips
DO NOT Mill Any of
the Following
The Nutrimill has 2 control knobs the upper motor
speed knob, and the lower feed rate knob.
Upper Motor Speed Knob:
For most grains it is recommended that you leave
the motor speed knob turned all the way to the
left.
For coarse flour, start running the mill with the
knob turned all the way to the left for 15 to 20
seconds then turn the knob all the way to the
right.
Lower Feed Rate Knob:
When you start milling, always turn the feed rate
knob all the way to the right for 15 seconds to
allow the grain to start flowing freely. Then you
may turn the knob to your desired setting.
For great all-purpose
bread flour most people
recommend adjusting
the feed rate knob to a
setting just to the right of
straight up and down or a
1 o’clock position.
Milling positions may very depending on the type,
amount, and size of grain that is used.
Larger grains such as legumes, or rice will mill
slowly, while small grains like wheat or millet mill
quickly.
• FLAX SEED
• SUNFLOWER SEEDS
• SESAME SEEDS
• NUTS OF ANY KIND
• SPICES
• TAPIOCA
• SPROUTED GRAINS
• DRIED FRUITS OR VEGETABLES
• SUGARS (BROWN OR WHITE)
• COFFEE BEANS
• OATMEAL
• ROLLED OATS
• HERBS
• HEMP
• CHOCOLATE
• GOJI BERRIES
Ideal for dry grinding: coffee beans, shelled
nuts, herbs, spices, and seeds such as flax,
sesame and sunflower. Also grinds other items
not suitable for milling in your
Nutrimill.
Available in white and
black
L’EQUIP Coffee Grinder & Seed Mill
See your L’EQUIP Retailer to purchase this product.
Separator cup
Gasket
Filter
Motor
Speed Knob
Feed
Rate Knob
