leptron RDASS HD2, Flight Manual

Page: 55 / 64

49
GROUND STATION PREPARATION (if in use)
[Optional] Tablet WiFi
– Connect to Cell Phone Hot Spot
Ground Station App
– Launch
Flight Plan
– Build or Open as required
Ground Station Connection to Aircraft - Verify
Flight Plan - Upload
TAKE-OFF CHECKS
Verify SD Card(s) Installation
Status Indicators – Verify (GoPro, Satellites, Voltage, Height)
Check Area for Non-Participants and Potential Hazards
Timer
– Activate
Motors
– Startup (Keep Throttle at ¼ position)
Takeoff
– Verify Aircraft Stability
(Optional) Ground Station "GO" Button
– Press as required
GROUND STATION POST-FLIGHT CHECKS (if in use)
Tablet – Off
Cell Phone Hot Spot – Off
POST FLIGHT CHECKS
Throttle Stick
– Full Down for 6 seconds
Verify Rotors STOP
Timer
– Stop (Announce Flight Time to VO for Logbook)
Flight Battery – Disconnect
GoPro – Stop recording and power off
IR Camera (if installed) Lens Cover – Replace
Check Motors for Excessive Heat
( Warning : Motors Can Be Hot!)
Tablet Power
– OFF
Radio Controller – OFF
Flight Logs
– Record
NOTAMs
– Close as required
Review Recorded Data
Post Flight Debrief
– Complete