Leonard LAS6100F, User Manual

Page: 15 / 36

You cannot activate or operate
the appliance. The appliance is not connected
to an electrical supply or it is
connected incorrectly. Check if the appliance is cor-
rectly connected to the electri-
cal supply (refer to connection
diagram).
Problem with the house electri-
cal system. Examine the fuse in the electri-
cal system of the house in the
fuse box. If the fuses blow
again and again, speak to
qualified electrician.
The residual heat indicator
does not come on. The cooking zone is not hot
because it operated only for a
short time. If the cooking zone operated
sufficiently long to be hot,
speak to the service centre.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on. Make sure, you operated the appliance cor-
rectly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer service
and conditions of guarantee are in the guar-
antee booklet.
INSTALLATION
Warning! Refer to the Safety chapters.
Before the installation , note down
the serial number (Ser. Nr.) from the
rating plate.
The rating plate of the
appliance is on its lower casing.
LAS6100F 949 594 292 00
58 PEE 11 AO
Leonard
220-240 V 50-60 Hz
6 kW Made in Germany
Built-in appliances
• Only use the built-in appliances after you
assemble the appliance into correct built-
in units and work surfaces that align to
the standards.
Connection cable
• The appliance is supplied with the con-
nection cable.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak to your local Service
Centre.
Assembly
min.
50mm
min.
500mm
490
+1
mm 560
+1
mm
R 5mm
55mm
leonard 15