9
10
7. Tube and Tire Assembly
Please check if all spokes and holes are completely covered by the rim tape. Inflate the hose
slightly until it has a round shape, then insert the valve through the hole provided. Please insert
the tube into the tire.
CAUTION
● Do not use any sharp objects for mounting.
● Starting opposite the valve, mount the other side of the tyre on the rim.
● The tube must not be trapped between the tire and the rim.
● Make sure that the valve is in a right-angled position.
● It is best to use a pump with a pressure gauge for inflation.
● The permissible pressure range is indicated on the sidewall of the tire.
● Check the tire pressure at least once a month.
Inner tube, Tire
8. Mounting Motorized Front Impeller
Install the impeller with motor as shown in the picture, please refer to step 11. The suit torque
should be between 20-40 Nm, please follow the instructions of the manufacturer of your bicycle.
* The tools you may need: 18mm spanner.
