Lenze 13466147 EDBSM01 v19 EN
15
Installation 3
3.2.3 Input Wire Size Requirements
Input Wire Size Requirements
120 Vac 1 phase
208/240 Vac 1 phase
208/240 Vac 3 phase
400/480 Vac 3 phase
Model
AWG mm
2
Model
AWG mm
2
Model AWG mm
2
Model AWG mm
2
SM004S
14
2.5
S_204S
14
2.5
SM005S
14
2.5
S_205S
14
2.5
SM205
14
2.5
SM405
14
2.5
S_208S
14
2.5
SM010S
12
4.0
S_210S
14
2.5
SM210
14
2.5
SM410
14
2.5
SM015S
10
6.0
S_215S
14
2.5
SM215
14
2.5
SM415
14
2.5
S_220S
12
4.0
SM220
14
2.5
SM420
14
2.5
S_230S
10
6.0
SM230
14
2.5
SM430
14
2.5
SM250
12
4.0
SM450
14
2.5
SM275
8
10
SM475
12
4.0
SM2100
8
10
SM4100
10
6.0
SM2150
6
16
SM4150
8
10
3.2.4 Installation According to EMC Requirements
The SCM and SCL Series can be installed to meet the European standards for Electromagnetic
Compatibility (EMC) requirements. These requirements govern the permissible electromagnetic
emissions and immunity, both radiated and conducted, of a drive system.
The EMC requirements apply to the final installation in its entirety, not to the individual components
used. Because every installation is different, the recommended installation should follow these
guidelines as a minimum. Additional equipment (such as ferrite core absorbers on power conductors)
or alternative wiring practices may be required to meet conformance in some installations.
Filter:
The input to the drive (or group of drives) must include a filter to reduce the electrical noise
reflected back to the AC Line. The SCL Series includes a filter that has been tested to meet the industrial
standards set by the EU, EN 61800-3 for conducted emissions and EN 55011 for radiated emissions
to class A compliance when installed in a control cabinet with a motor cable < 10m. The SCM can be
installed to meet these same standards when used with an appropriately installed external line filter.
EMC
Compliance with EN 61800-3/A11
Installation: Shielded cable must be used for all control and power cables
and exposed wiring must be kept as short as possible.
A
Screen clamps
B
Control cable
C
Low-capacitance motor cable
(core/core < 75 pF/m, core/screen < 150 pF/m)
D
Electrically conductive mounting plate
E
Filter
SM01-1
B
C
D
A
E
