Flange mounting
Depending on the ordered version, different flanges can be mounted to the gearbox.
Please pay attention to the order codes marked on the packaging!
You need:
•
Allen key for fixing screws
•
Screw locking adhesive (recommended: Loctite 243)
Perform the following activities:
1
.
Clean connecting surface of gearbox and flange.
2
.
Apply a thin layer of securing adhesive to the thread of the fixing screws.
3
.
Mount flange to the gearbox. Push the centring at the flange into the center hole of the gearbox until
both connecting surfaces have contact
4
.
Tighten fixing screws with the given torque.
Thread / property class
Tightening torque [Nm]
M6 / 8.8
11
M8 / 8.8
25
Mechanical installation
Mounting
Product extensions
58
