Safety instructions
General safety and application notes for Lenze motor starters
1
l
44
EDKLCMZ3024−SPS DE/EN 4.0
1
Safety instructions
1.1
General safety and application notes for Lenze motor starters
(according to Low−Voltage Directive 73/23/EEC)
General
Lenze motor starters − according to their enclosure − can have live, and also moving or
rotating parts during operation. Surfaces can be hot.
Non−authorised removal of the required cover, inappropriate use, incorrect installation or
operation create the risk of severe injury to persons or damage to material assets.
More information can be obtained from the documentation.
All operations concerning transport, installation, and commissioning as well as
maintenance must be carried out by qualified, skilled personnel (IEC 364/CENELEC HD 384
or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and national regulations for the
prevention of accidents must be observed).
According to this basic safety information qualified, skilled personnel are persons who are
familiar with the assembly, installation, commissioning, and operation of the product and
who have the qualifications necessary for their occupation.
Application as directed
Motor starters are components intended for the installation in electrical systems or
machines. They are not household appliances, but are designed as components exclusively
for application for commercial or professional use in accordance with EN 61000−3−2. The
documentation contains notes concerning the compliance with the limit values in
accordance with EN 61000−3−2.
When installing the motor starters into machines, commissioning (i.e. starting of
operation as directed) is prohibited until it is proven that the machine corresponds to the
regulations of the EC Directive 98/37/EC (Machinery Directive); EN 60204 must be
observed.
Commissioning (i.e. starting of operation as directed) is only allowed when there is
compliance with the EMC Directive (89/336/EEC).
The motor starters comply with the requirements of Low−Voltage Directive 73/23/EEC.
The harmonised standards of the EN 60947−4−2/DIN VDE 0660 series are applied to the
motor starters.
The technical data as well as the connection conditions can be obtained from the
nameplate and the documentation. They must be strictly observed.
Warning:
The motor starters are products with a limited availability in accordance with
EN 60947−4−2/DIN VDE 0660. These products can cause radio interferences in residential
areas. In this case, the operator may be required to implement corresponding measures.
Transport, storage
Please observe the notes on transport, storage and appropriate handling.
Observe the climatic conditions in accordance with EN 60947−4−2/DIN VDE 0660.
Summary of Contents for L-force
Page 3: ...lcu122_000A...
Page 37: ...Notizen l 37 EDKLCMZ3024 SPS DE EN 4 0...
