Mechanical installation
Important notes
4
l
50
LDCDS−CPC5100 DE/EN 1.1
4
Mechanical installation
4.1
Important notes
The installation must be carried out by qualified, skilled personnel familiar with the
applicable national standards.
4.2
Mounting steps
Proceed as follows for the mounting:
1. Check that the installation location meets the operating conditions specified in the
technical data (
¶
47).
2. Prepare the control cabinet mounting plate.
– Observe the dimensions and mounting clearances (
¶
49).
– There must be sufficient space for inserting disks into or ejecting them from the
DVD drive.
– The ventilation slots must not be covered.
3. Screw the device onto the mounting plate.
– The mounting location and the installation material must guarantee a permanent
mechanical connection.
