Safety information
Electrical connection
When working on live drive controllers, the applicable national regulations for the prevention of
accidents (e.g. VBG 4) must be observed.
The electrical installation must be carried out according to the appropriate regulations (e.g. cable
cross-sections, fuses, PE connection). Additional information can be obtained from the
documentation.
The documentation contains information about installation in compliance with EMC (shielding,
grounding, filters and cables). These notes must also be observed for CE-marked controllers. The
manufacturer of the system or machine is responsible for the compliance with the required limit
values demanded by the EMC legislation.
Operation
Systems including controllers must be equipped with additional monitoring and protection devices
according to the corresponding standards (e.g. technical equipment, regulations for prevention of
accidents, etc.). If necessary, adapt the controllers to your application. Please observe the
corresponding information given in the Instructions.
After the controller has been disconnected from the supply voltage, live components and power
connection must not be touched immediately since capacitors could be charged. Please observe the
corresponding notes on the controller.
All covers and doors must be closed during operation.
Information for UL approved systems with integrated controllers:
UL warnings are notes which
apply to UL systems. The documentation contains special information about UL.
Safe standstill
-1-
Variant V004 of the controller series 9300 and 9300 vector, variante x4x of the controller series 8200
vector and axis controller ECSxAxxx support the function
”
Safe standstill
”
, protection against
unintended start, according to the requirements of Appendix I, No. 1.2.7 of the EC Directive
”
Machinery
”
98/37/EG, DIN EN 954-1 category 3 and DIN EN 1037. It is absolutely necessary to
observe the information about the function
”
Safe standstill
”
in the corresponding documentation and
instructions.
Maintenance and servicing
Please observe the information given in the documentation.
The product-specific safety and application notes in these instructions must also be
observed!
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
Show/Hide Bookmarks