INTRODUCTION
Thank you for purchasing our convection heater, each unit has been manufactured to
ensure safety and reliability, Before first use, please read the instruction carefully and
keep for further reference.
DESCRIPTION OF THE DEVICE
ASSEMBLE INSTRUCTION
-Installation of portable wheel (See the sketch map1);
1. Take out the heater, Put it on a smooth Solid tabletop or ground;
2. Take out foot plate;
3. Alignment two holes between plate and bottom of heater. To install the plate, make
sure the screw is tightened fully;
sketch map 1
-Installation of wall mounting (See the sketch map 3)
IMPORTANT:
Requirement of using area for wall-mounting type (See the sketch map 2)
1. Wheel
4. Switch
2.Plate
5 Thermostat
3.Body
