sketch map 2
1. Drill two holes for each side on the wall in one line;
2. Insert the expanded screw into the holes, and install the steel hook securely to the
wall by the screws.
3. Raise the heater upright, and then push the heater onto hook
4. Move the heater smoothly on the right or left to catch steady the right rabbet position
Sketch map 3
HEATER OPERATION
1. Choose a suitable location for the heater, taking into account the safety instructions;
2. Set all the controls to OFF position and insert the plug into a socket-outlet that is well
grounded. Be sure that plug fits firmly.
3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as
follow:
(I) for low heat
(II) for medium heat
(III) for high heat
4. When your room reaches the desired temperature, now slowly rotate the thermostat
knob counter clockwise until the pilot light goes out. As soon as the room temperature
has dropped below a set value, the unit will re-work automatically until the set
temperature has been reached.
5. If you want to change the room temperature setting, rotate the thermostat knob
clockwise to raise the temperature, or counter clockwise to lower it.
6. Do not cover the convection heater at any time during oper
ation, there’s a risk of file
if the heater is covered
7. Once you have finished using your heater, turn the power switch off, and unplug from
the main supply
