CAUTION:
TO AVOID DAMAGE TO YOUR BENCH TOP AND SPLASH BACK, DO NOT PLACE AIR FRYER
DIRECTLY ON BENCH TOP.
Please use air fryer on heat proof material and on a dry, level and even surface. Leave a
minimum distance of 20cm from walls and other heat sensitive materials.
Do not place the appliance against a wall or against a wall or against other appliances.
Hot air up to 160 Degrees expels through the rear vent of the appliance.
Leave at least 20cm clearance around the entire appliance, including directly above it.
Additional care should be taken when placing appliances on bench top surfaces or near
splash backs where such materials (Acrylics, timber, stone etc.) do not have the high heat
resistant properties.
Place the appliance on top of a heat resistant material between bench and appliance and
further away from wall surfaces/ splash backs.
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read instructions carefully before use.
2. Remove and safely disregard any packaging material and labels before using this product
for the first time. Ensure children and babies do not play with plastic bags or any packaging
materials.
3. Before use, check that your local voltage corresponds with the specifications shown on
the appliance nameplate located underneath or on the back of the appliance.
4. Always operate the appliance on a horizontal surface which is level, stable and non-
combustible. Do not operate the appliance on or near combustible materials such as
tablecloths or curtains.
5. Do not place the appliance on or near a hot gas or electric burner, or in a heated oven.
6. Never connect this appliance to an external timer or separate remote-control system.
7. Never use this appliance with an extension cord or power board. Ensure it is plugged into
a dedicated power point and without any other appliances on the same outlet.
8. Do not turn on the power until the appliance and parts are in place as required. Make
sure the door is closed before plugging in and switching on the power.