ASSEMBLY:
Handlebar Steer Tube Assembly
Tools required: 5 mm hex wrench, 10 mm wrench
1.
Depress the push button located on the rear of the fork and insert the handlebar steer tube
onto the fork. The push button should align with the locator hole in the handlebar steer
tube and lock the steer tube securely in place.
2.
Tighten the bolts with the 5mm hex wrench and 10 mm wrench. Tighten bolts evenly and
securely
.
3.
Align handlebars both vertically and horizontally (a) onto handlebar steer tube
clamp (b) install handlebar clamp and hardware (c&d) and tighten evenly and
securely with the 5mm hex wrench and
10mm
wrench.
Summary of Contents for ES70BL
Page 17: ...SCOOTER COMPONENTS ...