OPERATING INSTRUCTIONS:
Setting the clock:
1.
You must switch off the radio before you set the clock time.
2. Press and hold the “Pre/M+/TIME Set” button until the display begins to flash.
3. Press the Hour and Minute buttons to adjust the time.
If the hour is in PM, press the Hour button until the PM indicator is shown on the display.
4. Press the “Pre/M+/TIME Set” button again to finish setting the time.
Setting the Alarm:
1. You must switch off the radio before you set the alarm time.
2. Press and hold the “VOL + AL 1” or “VOL - AL 2” button until the Hour display begins to flash.
3. Use the “TU- HOUR BUTTON” to change the hour
4. Use the “TU+ MINUTE BUTTON” to change the minute.
5. When your chosen alarm time is shown on the screen, do not touch anything. The time will blink on the screen for 5
seconds. When the time display shows the current time, the alarm has been saved.
6. Press the “VOL + AL 1” or “VOL - AL 2” button again to select a wake mode (wake by radio or by buzzer).
The display will show an icon of a bell to indicate wake by buzzer; the radio icon indicates wake by radio.\
To turn off an alarm – once it has sounded – press the ON/OFF button.
The alarm will sound again the next day.
Canceling the Daily Alarm:
If you do not want the alarm to sound, press the “VOL + AL 1” or “VOL - AL 2” until there is no buzzer or radio icon
shown on the screen.
Setting the Sleep Time:
1.
You must switch off the radio before you set the alarm time.
2. Press the Sleep button repeatedly to set the sleep time (90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF).
The radio will turn itself off after the set amount of time has elapse
Snooze:
Press the SNOOZE button when the alarm is sounding to stop the alarm, and have it sound again automatically after
9 minutes.
To use the projector:
The projector time is synchronized with the main clock.
You just need to press the “Projection ON/OFF” button (also the SNOOZE button) to turn on the projector.
Then turn the focus dial to focus the image.
The angle of the projector cannot be adjusted. It can only point directly up to the ceiling.
