Radio:
To increase radio reception, use the wire antenna.
Ensure the wire antenna is un-wound, hold it upwards and tape it to a wall.
1. Press the “ON/OFF” button to turn the clock radio on or off.
2. Press the “AM/FM” button to select radio band.
3. Press the “TU+” or “TU-“ button to tune to the desired station.
4. Press the “VOL +” or “VOL -“ button to adjust the volume.
Setting Preset memory stations:
1. Press and hold the “Pre/M+/TIME Set” button for 2 seconds to save the current station to preset memory.
The position number will blink on the screen. While it blinks on the screen within 2 seconds press the
“Pre/M+/TIME Set” button once to save that station to the preset memories.
If the display shows “P01”, the station is saved as Preset 1. If the display shows “P02”, the station is saved as Preset
2.
2. Press the “TU+” or “TU-“ button to tune to another radio station.
Repeat the instruction above to save another radio station.
Continue saving desired radio stations.
3. If you wish to save a particular radio station as a certain preset number, that can be done.
When the chosen radio station is shown in the screen,
Press and hold the “Pre/M+/TIME Set” button for 2 seconds to save the current station to preset memory.
The position number will blink on the screen.
While it blinks on the screen within 2 seconds press the “TU+” or “TU-“ button to change the position number to a
different one. Then press the “Pre/M+/TIME Set” button once to save that station to the preset memories.
SPECIFICATIONS:
Frequency Range
：
AM 540-1600KHz
FM 88 –108 MHz
Power Source: AC 230V ~ 50 Hz, 3W
CR2032 Battery for back up only
Power Output: 400 mW
