Lenoxx CD-511 Operating Instructions Manual Download

Page: 6 / 24

IB-CD511(TA)-SW-E-091002

REMOTE CONTROL

The CD PLAYER can be operated with the REMOTE CONTROL provided (includes

the following controls: POWER ON/OFF, MUTE, VOLUME, CD REPEAT and PLAY).

Slide the battery cover off to remove the batteries. Insert 2 X LR4 (size AAA)

batteries (not included) correctly so that the + and - polarities match the polarity

indicators inside the battery compartment.

NOTE:

About half a year of normal operation can be expected when using alkaline
batteries.

When the batteries are worn out, the remote control will stop working.

Replace both batteries with new ones.

When the remote control is not to be used for a long time (2 months or

more), the batteries should be removed to avoid possible damage that may

be caused by battery leakage.

Avoid keeping the remote control in extremely hot or humid locations.

The remote control will operate at a distance of between about 0.2m (8

inches) and 6m (20 feet

)

from the remote sensor.

1. POWER ON/OFF

2. MUTE

3. REPEAT - ONE & ALL SONGS

4. PROGRAMME

5. VOLUME UP/DOWN

6. SKIP/SEARCH BACKWARD

7. SKIP/SEARCH FORWARD

8. STOP

9. PLAY/PAUSE

“A

”

“AAA

”

NOTE

: When you press the POWER

ON/OFF button to switch the

player off, the VFD display will

go out and the STANDBY

indicator on the main unit will

come on.

NOTE

: When you use the REMOTE CONTROL to operate the CD PLAYER,

make sure the POWER button on the main unit is turned on.

Otherwise, the REMOTE CONTROL will not work.

Summary of Contents for CD-511

























Search results

Summary of Contents for CD-511

Reviews:

Related manuals for CD-511

Brands by name

Popular brands

Lenoxx CD-511, Operating Instructions Manual

Search results

Summary of Contents for CD-511

Reviews:

Related manuals for CD-511

Brands by name

Popular brands