Lenoxx CD-511 Operating Instructions Manual Download Page 23

Page: 23 / 24

IB-CD511(TA)-SW-E-091002

TROUBLE SHOOTING

Problem

The power is not on.

Connect the AC power cord securely to a wall outlet.

Make sure the batteries are inserted correctly and

are not worn out.

There is no sound.

Make sure the FUNCTION switch is in the correct

position.

Adjust the volume.

Unplug the headphones when listening

through the speakers.

appears in the display even

when a CD is in place.

Insert the CD with the label side up.

CD does not play.

Make sure that the CD compartment is closed.

Clean the CD.

Remove the CD and leave the CD DOOR open for

about an hour to get rid of moisture condensation.

Make sure the FUNCTION switch is in the CD position.

Sound is weak or sound quality is

poor.

Replace all the batteries with new ones if

they are low, move the player close to a

window for better MW reception or rotate it

for better FM reception.

The RECORD button does not

function/The tape does not play.

Make sure the safety tab on the cassette

is in place (see page 20).

Make sure the FUNCTION switch is in the

TAPE position.

The tape does not erase

completely.

Clean the erasing head (see page 21).

Replace all the batteries with new ones if they are
low.

The tape does not record.

Make sure the tape is inserted correctly.

Make sure the safety tab on the cassette is in place.

Sound is weak or sound quality is

poor.

Clean the heads, pinch roller and capstan
(see page 21).

General

CD player

Radio

Tape player

Cassette PLAY button pops up.

The tape has reached the end of one side. Remove,
turn over and re-insert.

VFD display does not light up.

You may be using battery power. The VFD display
will only light up when AC power is used.

Remedy

It is normal since the radio uses less power than

the CD player.

The sound drops out.

CD does not play while radio may

continue to play.

Clean the CD or replace it if it is badly damaged.

Place the player in a location free from vibrations.

Check that the batteries are not worn out.

Tape jamming or tangling

Use only better quality tapes.

Do not use a cassette with more than 90 minutes.

Make sure there are no loose layers of tape visible

before inserting the cassette.

Summary of Contents for CD-511

























Search results

Summary of Contents for CD-511

Reviews:

Related manuals for CD-511

Brands by name

Popular brands

Lenoxx CD-511, Operating Instructions Manual

Search results

Summary of Contents for CD-511

Reviews:

Related manuals for CD-511

Brands by name

Popular brands