manualshive.com logo in svg

Lenovo YOGA 710-11IKB, Hardware Maintenance Manual

The Lenovo YOGA 710-11IKB is a versatile 2-in-1 laptop perfect for those looking for portability and functionality. Discover all the amazing features and get the most out of your device with the comprehensive User Manual, available for download free of charge from our website.

Share
Download
background image

22

YOGA 710-11ISK/YOGA 710-11IKB Hardware Maintenance Manual

Checking operational charging

To check whether the battery charges properly during operation, use a 

discharged battery pack or a battery pack that has less than 50% of the total 

power remaining when installed in the computer. 
Perform operational charging. If the battery status indicator or icon is not lit, 

remove the battery pack and let it return to room temperature. Reinstall the 

battery pack. If the charge indicator or icon is still off, replace the battery pack.

If the charge indicator is still not lit, replace the system board.

Summary of Contents for YOGA 710-11IKB





































































Reviews:

No comments

Related manuals for YOGA 710-11IKB

Brands by name

Popular brands

Load more brands