Lenovo V50t Gen 2 Hardware Maintenance Manual Download Page 84 | Manualshive

Page: 84 / 86

background image

on development-level systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their
specific environment.

This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux
agreement(s) which may accompany software included with this product. Lenovo may update this document
at any time without notice.

For the latest information or any questions or comments, contact or visit the Lenovo Web site:

https://pcsupport.lenovo.com

Trademarks

LENOVO and LENOVO logo are trademarks of Lenovo. Intel, Intel SpeedStep, Optane, and Thunderbolt are
trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Microsoft, Windows,
Direct3D, BitLocker, and Cortana are trademarks of the Microsoft group of companies. Mini DisplayPort
(mDP), DisplayPort, and VESA are trademarks of the Video Electronics Standards Association. The terms
HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries. Wi-Fi, Wi-Fi Alliance, WiGig, and Miracast are
registered trademarks of Wi-Fi Alliance. USB-C is a registered trademark of USB Implementers Forum. All
other trademarks are the property of their respective owners.

80

V50t Gen 2 Hardware Maintenance Manual

«
...
82
83
84
85
86
»

Summary of Contents for V50t Gen 2























































































Reviews:

No comments

Related manuals for V50t Gen 2

Dynapro ET 3200 Series

Brand: 3M Pages: 23

Brand: Wasp Barcode Technologies Pages: 69

Compute Stick STK1A32SC

Brand: Intel Pages: 11

Afolux LX Series

Brand: IEI Technology Pages: 131

IntelliStation POWER 9114 Model 275

Brand: IBM Pages: 92

Brand: Casio Pages: 133

SIMATIC IPC627C

Brand: Siemens Pages: 52

Brand: Siemens Pages: 32

INOX PRO SIMATIC IPC277D

Brand: Siemens Pages: 25

simatic ipc227e

Brand: Siemens Pages: 156

SIMATIC Box PC 620

Brand: Siemens Pages: 226

Brand: Cray Pages: 56

Allen-Bradley VersaView 5000 ThinManager Series

Brand: Rockwell Automation Pages: 72

Brand: Partner Pages: 52

Brand: Shuttle Pages: 25

Kontron SBOX-7210

Brand: S&T Pages: 99

Brand: Janz Tec Pages: 27

Brand: Portwell Pages: 51

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands