Lenovo V50t Gen 2 Hardware Maintenance Manual Download Page 47

Page: 47 / 86

Problem

Solution

The Bluetooth feature does not work.

• Enable the Bluetooth feature in UEFI BIOS.

• Enable all Bluetooth devices.

1. Right-click the

Start

button to open the

Start

context menu.

2. Click

Device Manager

. Type the administrator password or

provide confirmation if prompted.

3. Expand

Bluetooth

to display all Bluetooth devices. Right-click

each Bluetooth device, and then click

Enable device

4. Expand

Network adapters

to display all network devices.

Right-click each Bluetooth device, and then click

Enable

device

• Turn on the Bluetooth radio.

1. Open the

Start

menu.

2. Click

Settings

➙

Devices

➙

Bluetooth & other devices

3. Turn on the

Bluetooth

switch to enable the Bluetooth feature.

• Update or reinstall the Bluetooth driver.

Sound does not come from the Bluetooth
headset or headphones.

Select the Bluetooth headset or headphones as the default audio
output device in advanced sound settings.

Chapter 5

Troubleshooting and diagnostics

Summary of Contents for V50t Gen 2























































































Search results

Summary of Contents for V50t Gen 2

Reviews:

Related manuals for V50t Gen 2

Brands by name

Popular brands

Lenovo V50t Gen 2, Hardware Maintenance Manual

Search results

Summary of Contents for V50t Gen 2

Reviews:

Related manuals for V50t Gen 2

Brands by name

Popular brands