Replacing customer-replaceable units (CRUs)
29
Replacing the memory module
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer
supports two memory modules, install one memory module into the DIMM 1 slot first and then install the
other into the DIMM 2 slot.
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
2
Remove the computer cover. For details, see
Removing the computer cover.
3
Remove the front bezel. For details, see
Replacing the front bezel.
4
Pivot the drive bay assembly upward. For details, see
Pivoting the drive bay assembly upward and
downward.
5
Replace the memory module.
1
2
6
Reinstall the removed parts and computer cover, and then reconnect the cables. For details,
see
Completing the parts replacement.
